Mp237 Printer Service Instructions

MP237 printer defect that needs to be reset:

• On the computer appears warning words "ink absorber is full"
• When the printer is turned on, the printer is only silence, the cartridge does not move
• 1x blinking indicator light turns

Solution how to reset MP237

There are two steps to reset process:
First: enter safe mode

• Make sure the printer is turned off / off
• Press the stop / reset hold is not released, then press power button
• In a state still pressing the power button, release the stop / reset, and then press the button stop / reset as much as 5x (from personal experience successfully at 5x, maybe others have successfully at 6x or 2x please share it in the comments field)
• Then off power button along with a button stop / reset
• If successful, the computer will detect a new printer, just ignore it and followed the movement of the cartridge home, wait until standstill

Second: reset using service tool

• Install the driver
• Run the software resetter, if not have please download
• Follow-click steps as in the following figure below:

1. Click EEPROM
2. The Clear Ink Counter, Absorber select Main, and then click Set
3. The Ink Absorber Counter, Absorber select Main, and then click Set

Turn the printer off and then on again, if successful, the printer is not blinking.