How to fix error on Canon IP2770

First Steps reset printer canon iP2770 is to be entered in the service mode in advance, the following steps:

1. When the printer is turned off and the power cord is connected
2. Press the RESUME button for 2 seconds, then press the POWER button until the green light is on (pressing the power button still does not release the RESUME button)
3. Then release the RESUME. button, but do not release the POWER button
4. After pressing the POWER button press continue button 5 times
5. Led will flash from green to orange alternating with last flame orange. (Don't do 4x mistakes, printer will die later)
6. Release both buttons simultaneously
7. Led blinks for a while and then blinks GREEN
8. Computer detects new device, leave it.
9. This shows the status of the iP2770 printer in MAINTENANCE MODE and ready for reset.
10. Next Run Resetter Canon iP2770 v.1.07
11. File Extraction iP2770 Resetter
12. Prepare 2 papers for the printer (to print when reset)
13. Click MAIN menu tool reset service
    
14. TThen the printer prints pages D = 00000 EP
    
15. Then click the EEPROM clear button
    the printer prints a write code indicating that the printer has been initialized (when clicked, a message appears in EEPROM paper source, click OK).
16. Restart The Printer
17. It's done

First Steps reset printer canon iP2770 is to be entered in the service mode in advance, the following steps:

1. When the printer is turned off and the power cord attached
2. Press the RESUME button for 2 seconds and then press the POWER button until the green light on (when pressing the POWER button, RESUME button is not released yet)
3. Then release the RESUME, but do not release the POWER button
4. With the state of the POWER button is pressed, press the Resume button 5 times
5. Led will light green orange alternately with the last flame orange. (Don't make 4x mistakes, the printer will die later)
6. Release both buttons simultaneously
7. Led will flash briefly then will flash GREEN
8. PC will detect new device, leave it.
9. This shows the iP2770 printer SERVICE MODE state and is ready to be reset
10. Next run Resetter Canon iP2770 v.1.07
11. File Exctract iP2770 Resetter
12. Prepare 2 paper in the printer (to print at the time of reset)
13. Click MAIN on the menu tool reset service
    
14. Then the printer prints pages D = 00000
    
15. Then click the EEPROM clear button
    When the EEPROM click the printer will print the writings code stating that the printer is reset (when clicked will display the message EEPROM paper source, click OK).
16. Restart the Printer
17. It's done