How to fix E05, 5B00, P07 error trouble on Canon Printer MP258

With so many users of canon printer MP258, then the more likely to have damage or errors on printer and looking for a way or solution.
Some common errors that may occur on the canon printer MP258 is E05 Error,5B00 Error and P07 Error.

If you are currently experiencing one of the above error, How to Reset canon printer MP258 written this can be tried.
Tutorial how to reset canon MP258 is quite easy to do as long as you are careful in practice.
Author of several times to reset canon MP258, almost never find a failure, if ever because there are step missing in the reset canon printer MP258.

canon MP258 Error 5B00

2 Steps To Reset Canon Printer MP258

I. Stage Make Canon MP258 In Service Mode

  1. If the Canon printer MP258 is turned on, turn the printer off by pressing the power button.
  2. If MP258 are switched off, make sure the printer power cable plugged into a power outlet.
  3. Use two fingers of your hands to press the STOP / RESET and POWER button canon printer MP258, hold the buttons.
  4. Remove the finger pressing the STOP / RESET (power button remains pressed) followed by pressing the back button STOP / RESET 2 times and release the 2 buttons simultaneously.
  5. If you are correct in doing the above points, led the printer will flash in line with the processing on the Canon MP258, wait until it is finished with the LED sign on the printer labeled with the number 0.
  6. At the same time, your computer will detect the new device, just ignore it because it was a sign of Canon MP258 you are ready to reset.

II. Service Tools Stage

  1. After downloaded The Service tools of canon MP258. Extract and run the service tools Canon MP258 capable to repair or fix the E05 Error, 5B00 Error and P07 Error.
  2. Put some paper to print during the reset process on canon MP258.
  3. Click MAIN button on the page service tools MP258, once clicked, the printer will print a piece of paper with the words "D = 000.0"
  4. Then click EEPROM Clear, proceed by clicking the button EEPROM
  5. When was clicking EEPROM then the printer will print one sheet of paper again reads the code "TTL=00000 COPY=00000".
    Indicates that the printer has been reset.
  6. Shut down and restart your printer.


After doing How to Reset Canon MP258 properly, your printer should have returned to normal and can be reused.

Popular Posts